oranges, orangejuice and more oranges scale 1:12.

I used this colors Fimo clay and mixed them together. So you make the inside of the orange.

1 part 014 and 1/8 part of 4 and 15.

For mixing the colors I use my pastamachine.

Now you mix these colors to make the parts of an orange.

1 part 014 and 1 part 0 and 1/8 part 17.

Repeat this till you got enough parts.

Now you have to make the peel. 

You have to squeeze gently and roll out until you get the right size for an orange.

When you want to make an orange you cut of a piece of 0,6 cm. and gently close both ends by pushing the orange clay over the inside of the orange.

For the juice I use Fimo liquid and a little bit of the clay from the peel. Mix this very well and you see that the collor of the peel solves in the liquid Fimo.

For empty peel you take the orange and broken white colors. Cut out a circle 0,8 cm. 

I used sandpaper and rolled over the oranges so the peel looks realistic. Now everything is ready to bake.

Ooops...I've spoiled some juice.