Thanks for visiting my blog.

Het zou leuk zijn wanneer je een berichtje achterlaat. :-)
I would appreciate a little message. :-)

Hierbij wil ik Petra bedanken want dankzij haar geweldige site,
www.poohbeers.eigenstart.nl, ben ik met de bouw van mijn poppenhuis begonnen.

Thanks to Petra. Without her nice site, www.poohbeers.eigenstart.nl, I would never been started with my doll house.

Ik probeer de dingen die ik maak zo goed mogelijk te omschrijven maar er kunnen soms typefoutjes in de tekst staan dus controleer van te voren even of het allemaal klopt.

The thing I create I put on my blog. Although I try to make no mistakes it's possible that something went wrong so please check before you make a copy.

dinsdag 21 augustus 2012

Troubleshooting

First I want to give a warm welcome to my new followers. I am glad to see that people are interested in the things I do.Criticism is always welcome especially when it is constructive. So don't hesitate please.

For the first time I have used paper this way. So I have to do some troubleshooting first.
Painting the pottery isn't "easy". I used to much paint. So the surface isn't smooth. There are small paint drops everywhere. Stupid me....I painted it all again so  the paint drops were still visible. I was too eager. So PATIENCE is my word at the moment.

I like to put a Victorian rose on the  pottery.

Here is the pattern 1:12 of Victorian roses.





I made a copy of this rose and glued it straight on. That didn't look good because you can see the lines of the paper. Maybe I had to paint around the paper before putting the nail varnish on the jug.


Wait !!! I still have copy gel. 


So I put few layers of copy gel on to the copy of the Victorian roses.Then I put it into the water. So the paper will solve and the roses stay on the copy gel.


I removed the paper cautious.


By rubbing my finger over the paper.


Because I put the copy gel with the copy into the water the copy gel was becoming a little flexible. 
The second time I decided it was better to put a wet piece of kitchen roll paper on the copied paper.


So only the paper gets wet. Not the copy gel. So the copy gel didn't get flexible. After removing the paper I glued the copy gel on the jug. The picture is not as bright but it looks a little old now.


The jug isn't perfect but it are practice pieces. Now I'm going to try to make a perfect one. 
Because the  people living during the Victorian period had a jug and bowl in the bedroom to wash themselves before entering the bed.


So here they are ... my practice pieces. Now I go for the real thing ..... enough practice and I hope to show the perfect bowl and jug in a week.
Therapy time again....cutting paper strips....rolling them with my hand drill.....and forming bowls.....wood glue.. paint and so on and on....

Frans is still working on the staircase of our house so the staircase of the doll house has to wait for a while but that will be continued also after our holiday in a few weeks. We 're going to Portugal soon to do the garden and the house.


Patience and perseverance you need for a dolls house or a thick wallet ..... ;-)

Tips are always welcome as well as constructive criticism.

Enjoy your week !!












dinsdag 14 augustus 2012

Creating jug and pottery with paper.

First of all I like to thanks Kris for sharing this wonderful idea of making pottery from paper

http://1inchminisbykris.blogspot.nl/

The first thing you have to do is cutting a lot of strips width 0,3 cm.




Then you glue the strips together with wood glue. For the jug I needed 8 strips.

Now you have to roll up the strip.


That's a piece of cake. Put a little glue at the end and glue that on to the roll.


You push gently on the roll. So the middle comes out. Be sure that on the outside the paper has a overlap from 0,2 cm. This makes it easier to sand the outside.
You put wood glue inside the bottom of the jug. Be sure that the glue is all around the inside. This makes the bottom solid. Then wait for a day to let the glue curing. Now you can sand the outside.


Now you glue the body pattern on the bottom.



Glue this all together. For the right instructions I recommend http://1inchminisbykris.blogspot.nl/
The pattern is also available at this blog.


It's important that you remove the glue before curing. You can't sand wood glue. You'll get strange bubbles on your jug when you don't remove it immediately.


I could use some therapy. So I went cutting paper again and again. I glued 14 strips together. The cork was to small for this length of strip to roll it against. So I glued  ivory cardboard on to the cork.


And I could enjoy myself.


The big one of 2,8 cm can be used for a bowl.



The three downside are sanded and the three above still need to be sanded. Now I have painted them with Humbrol enamel satin 130. When ready I will show them off.
Now I'm working with copy gel. To put a print of roses on the bowl. When that's ready I will put it on my blog.