Pewter casting is easy but working with the material is easy and tricky.
I used tin for electronics. This is pewter with resin core. During melting it smells unpleasant and I don't know if that's healthy! I used this because that was in our garage for recycling.
My first mistake. It's a very small object and I had to file it in shape. There was only the pouring hole I could use for handling the blade during file operatio. So next time I have to create a new mold. The pouring hole has to be a bit smaller at the blade side and the blade should be little longer so I can handle it better.
I had to file my nails so I start to file the blade.
Pewter is a very soft material so during file it gets hotter. The blade became soft and started to bend.
You have to cool it down during file. It is a very small item so heat spread easily.
Because pewter is soft you can cut it easily. I used this nippers to let it look very professional but you can use a pair of scissors.
Before cutting the pouring hole I had to decide which razor I would use. With the pouring hole still present I can handle the little thing. Should the razor be a bead from http://www.bindelsornaments.nl or one of wood. I decided that the bead was perfect.
Next problem. I should have made the blade longer. There is a too small part to glue the bead.
The glue has to dry for 24 hours. I put the knife into oasis to dry.
After drying I cut off the pouring hole. I could use the razor to file the part of the pouring hole.
Pffff......Jezus......You already guess ???
Yes during this process the blade decided to take another position and the razor decided to leave the blade.
Prototype.
End result.
My son came over and I proudly presented my knife. He put on his most serious face and said : "What is the difference between an iron wire and pewter?"
ROFL.
Okay I have to make a new mold and start all over again. Now I know how the material reacts. I also learned from the mistakes I made so maybe next time I can present a perfect knife.
So I'm off to make a new mold and melt the used pewter again. This time the pewter won't smell as terrible as the first time because the resin is evaporated ???? I wonder.
Have a nice weekend with a lot of fun.
I used tin for electronics. This is pewter with resin core. During melting it smells unpleasant and I don't know if that's healthy! I used this because that was in our garage for recycling.
My first mistake. It's a very small object and I had to file it in shape. There was only the pouring hole I could use for handling the blade during file operatio. So next time I have to create a new mold. The pouring hole has to be a bit smaller at the blade side and the blade should be little longer so I can handle it better.
I had to file my nails so I start to file the blade.
Pewter is a very soft material so during file it gets hotter. The blade became soft and started to bend.
You have to cool it down during file. It is a very small item so heat spread easily.
Because pewter is soft you can cut it easily. I used this nippers to let it look very professional but you can use a pair of scissors.
Before cutting the pouring hole I had to decide which razor I would use. With the pouring hole still present I can handle the little thing. Should the razor be a bead from http://www.bindelsornaments.nl or one of wood. I decided that the bead was perfect.
Next problem. I should have made the blade longer. There is a too small part to glue the bead.
The glue has to dry for 24 hours. I put the knife into oasis to dry.
After drying I cut off the pouring hole. I could use the razor to file the part of the pouring hole.
Pffff......Jezus......You already guess ???
Yes during this process the blade decided to take another position and the razor decided to leave the blade.
Prototype.
End result.
My son came over and I proudly presented my knife. He put on his most serious face and said : "What is the difference between an iron wire and pewter?"
ROFL.
Okay I have to make a new mold and start all over again. Now I know how the material reacts. I also learned from the mistakes I made so maybe next time I can present a perfect knife.
So I'm off to make a new mold and melt the used pewter again. This time the pewter won't smell as terrible as the first time because the resin is evaporated ???? I wonder.
Have a nice weekend with a lot of fun.
Ha Dorien, ondanks allerlei onverwachte moeilijkheden tijdens dit experimentele proces is het eindprodukt echt geweldig geworden! Het is heel interessant geweest om te lezen hoe je dit mini-mes voor elkaar gekregen hebt. En als ik het goed begrijp ga je de werkwijze nog verder verfijnen...tsjonge.....knap hoor!
BeantwoordenVerwijderenHoi Liduina,
BeantwoordenVerwijderenHet is zo'n simpel karweitje en bijzonder rustgevend dus ga ik gewoon weer van voor af aan beginnen.
Groetjes Dorien
Hello Dorien,
BeantwoordenVerwijderenThank you for the step by step instructions! I will definitely use this technique in the future. you did a great job.
Big hug,
Giac
Dear Giac,
VerwijderenYou're welcome. Did you use pewter already?
I love the material. It's so easy to work with.
Hugs Dorien
Wat een toestanden ben jij tegen gekomen in dit proces, Dorien, én (je zegt het zelf al) ik ben dezelfde mening toegedaan: je leert altijd geweldig veel van dingen, die niet gelijk lukken. Ik vind het zelf heerlijk om dingen uit te vogelen, net als jij, het geeft me bovendien ook kennis van zaken hoe ik het de volgende keer dan wél moet aanpakken! Geweldig gedaan, mooi resultaat en dank voor het delen van je bevindingen :D!
BeantwoordenVerwijderenFijn weekend toegewenst. Liefs, Ilona
Hi Ilona,
VerwijderenDankjewel voor je lieve woorden. Dat vind ik het leukste aan dat miniatuurspul. Je mag zelf alles uitdenken en wanneer het mislukt begin je gewoon opnieuw zonder dat het kapitalen kost.
Knuffel Dorien
Dear Goha,
BeantwoordenVerwijderenThanks for your support!!
Hugs Dorien
Dorien, you are Fantastic in your creativity! I know that with your perseverance toward perfection your efforts will pay off and get your son's approval as well! hah! :D I do the same with my children and often they just look at me bewildered? What is mom on about Now?! heehee But I know where you are coming from Dorien and I think that your knife is great and the next one will be even greater because YOU will make it so!
BeantwoordenVerwijderenelizabeth
Dear Elizabeth,
VerwijderenChildren are the most wonderful creatures! I think you get the message. They are getting you back to reality. LOL
I get lost sometimes in my miniature world and my kids get me back to reality.
I do hope to make a knife that
astonished myself. Thanks for your nice words.
Hugs Dorien